Solved!

‎07-14-201804:51 AM

Hello HP Support

i have obtained Microsoft Windows Server 2003 R2 Standard Service Pack 2 64 Bit Volume License ISO Untouched MSDN Setup image and burned it to DVD+RW Disk 2 disks and i tried to Boot off disk when it finishes loading Files and tries to Start Windows Setup it goes into a Blue Screen of Death. is The HP Z220 Workstation compatible with Windows Server 2003 R2 ?? Any Suggestions ?? do i have to use a ISO with SATA Drivers?

Dean Pepler.

Solved!

‎07-14-201807:18 AM

Hi, Dean:

Yes, you have to slipstream the sata drivers into your Server R2 installation media.

Or if you have a USB FDD, you can copy the files to a floppy disk and when you go to install Server 2003, hit the F6 key when prompted and Windows will continue to load files. Then it will stop and ask you to press the S key to add the drivers.

Now you will see the drivers on the FDD and you have to use the up/down arrow keys to scroll to and select the exact driver you need.

You can find that out beforehand by going to your W7 installation, and if the drive controller is set to ahci, there will be an IDE/ATA ATAPI controllers device manager category. Click to expand that, and you will find the name and model number of the Intel AHCI controller.

If the drive controller is set to RAID, there will be a storage controllers device manager category. Click to expand that and you will see the name and model number of the Intel SATA RAID controller.

I have zipped up and attached all of the XP x64 storage files below. One of them should work depending on how the drive controller is set.

Unzip and slipstream the entire folder, or unzip the folder and copy just the file contents to a floppy disk.

I have also attached a document for how to slipstream the drivers if you are not familiar with the process.

Solved!

‎07-14-201811:29 AM

@Paul Tikkanen This video - https://www.youtube.com/watch?v=m4V-o2U6s8M is it the same process As The PDF ? :)

Solved!

‎07-14-201811:33 AM - edited ‎07-14-201811:34 AM

Veer zaara full movie download. It received positive reviews from critics, with praise directed to the story, dialogues, performances and sensitive portrayal of India-Pakistan relations. The soundtrack album, based on old compositions by Madan Mohan with lyrics by Javed Akhtar, was the highest-selling album of the year in India. The film was released on 12 November 2004 during the Diwali festival, Veer-Zaara earned over 976.4 million worldwide, becoming the highest-grossing Indian film of the year in both India and overseas territories.

Yes, any of those will work.

I like the USB FDD approach the best. Put the files on the FDD, select the exact sata file you need and off it goes.

But once you are able to make the installation file, you will never have a problem with installing XP/Server 2003 on a newer PC.

BTW, your model was the last in the series that could run XP.

Solved!

‎07-14-201811:43 AM

ok i am Struggling with the nLite Slipstream process in the first window what am i suppose to put it says windows installation but its not accepting my WINDOWS XP Disk :( its nLite 1.4.9.3

i need a tutorial video on the Process the PDF is not helping i need video explaining the whole process

Solved!

‎07-14-201812:06 PM

Unfortunately, I can't be of any help to you regarding slipstreaming the drivers.

I used the tutorial I attached for you.

I did it many years ago, and from what I recall, it was very difficult to do.

It took me hours to get it right, and many wasted CD's before I was able to get it to work.

It was (and is), much easier for me to use my USB floppy disk drive to install the sata drivers when I need to install XP 32 or 64 bit on a PC.

I don't have a slipstreamed XP 64 bit disk.

I remembered how hard it was to make the 32 bit one, so I have always used the FDD to install XP x64.

Easy as pie to install the drivers using a FDD.

Solved!

‎07-14-201802:12 PM

so i managed to get The desktop to boot and messed with the BIOS 'i reset the BIOS to Default' but i booted off the Flash drive :D Success! :D not so much then windows xp only let me intall to the 8GB Flash drive not The 1 TB SATA Hard drive :(

then i burned the SAME ISO to DVD to try and get it to work as i used rufus to make windows XP bootable flash drive. i think i am going to have to take my Desktop to Matrix computers to install windows xp for me Windows XP Pro SP2 VL 32 bit i got a LEGIT Windows XP from The-Eye.eu/public/MSDN/ i read the 'F6ReadMe' ok so i have to put the Floppy rar file you gave onto a USB when pressing F6 :D WILL IT WORK :D

Solved!

‎07-14-201802:24 PM

Hi:

As far as I know, you can only put that file on a floppy disk.

Windows XP does not recognize a USB flash drive when you do the F6 method of installation.

I even tried to trick XP by renaming the USB drive letter to A: thinking that XP was looking for a drive letter A: which is what the floppy disk drive is always named in Windows.

Nope. Didn't see it at all.

Using a FDD is the only way I know of to install XP using the F6 prompt to install the sata drivers.

And as I wrote earlier, I was just lucky to finally make a slipstreamed XP 32 bit disk that worked.

In the end, it wasn't worth all the time and trouble it took me.

Solved!

‎07-14-201802:35 PM

oh dear i will take my HP Desktop to Matrix Computers to install Windows XP Pro 32 bit Service Pack 2 August 2004

i dont have a Cheque Card to spend 9 US Dollars i live in South Africa so i only have a debit card that doesn't work online.

i also dont have a Floppy disk nor i dont know where to buy one best bet is to take it to Experts :)

Solved!

‎07-14-201803:12 PM

i watched a video on how to do the slipstream process and i used Windows XP PRO SP2 X64 41611 ISO MSDN Untouched

• Open Menu

Didn't find what you were looking for? Ask the community